Mechanical Engineering Objective Questions { Internal Combustion Engines }

Home // Mechanical Engineering // Internal Combustion Engines

1. The working cycle in case of four stroke engine is completed in following number of revolutions of crankshaft

2. In a diesel engine, the fuel is ignited by

B. Injected fuel

C. Heat resulting from compressing air that is supplied for combustion

3. Scavenging air in diesel engine means

A. Air used for combustion sent under pressure

B. Forced air for cooling cylinder

C. Burnt air containing products of combustion

D. Air used for forcing burnt gases out of engine's cylinder during the exhaust period

4. Supercharging is the process of

A. Supplying the intake of an engine with air at a density greater than the density of the surrounding atmosphere

B. Providing forced cooling air

C. Injecting excess fuel for raising more load

D. Supplying compressed air to remove combustion products fully

5. Does the supply of scavenging air at a density greater than that of atmosphere mean engine is supercharged ?

C. To some extent

D. Unpredictable

6. The ratio of indicated thermal efficiency to the corresponding air standard cycle efficiency is called

A. Net efficiency

B. Cycle efficiency

C. Relative efficiency

D. Overall efficiency

7. Compression ratio of I.C. engines is

A. The ratio of volumes of air in cylinder before compression stroke and after compression stroke

B. Volume displaced by piston per stroke and clearance volume in cylinder

C. Ratio of pressure after compression and before compression

D. Swept volume/cylinder volume

Page 1 of 54

1 23 »