A Best Way To Crack Gorenment Job Exams

Civil Engineering Objective Questions { Hydraulics }



302. With a clinging nappe of a weir, the excess discharge, is
A. 6% to 7%
B. 8% to 10%
C. 18% to 20%
D. 25% to 30%
Discuss in Forum

303.  The notch angle for maximum discharge over a triangular notch, is
A. 30?
B. 60?
C.900
D.1200
Discuss in Forum

304.  A triangular notch is preferred to a rectangular notch because
A. only one reading is required
B. its formula is simple to remember
C. it gives more accurate results for low discharge
D. all the above.
Discuss in Forum

305. Manning's formula is used for
A. flow in open channels
B. head loss due to friction in open channels
C. head loss due to friction in pipes flowing full
D. flow in pipes.
Discuss in Forum

306.  A stepped notch is a combination of
A. rectangular notches of different sizes
B. triangular notches of different sizes
C. rectangular and triangular notches
D. all the above.
Discuss in Forum

307. The ratio of the percentage error in the discharge and percentage error in the measurement of head, over rectangular notch, is
A. 1/2
B. 2/3
C. 3/2
D. 3/4.
Discuss in Forum

308.  The ratio of the percentagge error in the discharge and percentage error in the measurement of head over a triangular notch, is
A. 2/3
B. 3/2
C. 2/5
D. 5/2.
Discuss in Forum

Page 44 of 61

« 42 43  44  4546 »