A Best Way To Crack Gorenment Job Exams

Civil Engineering Objective Questions { Highway Engineering }



239.  Width of the shoulders of carriage way is generally kept
A. 100 cm
B. 125 cm
C. 150 cm
D. 250 cm.
Discuss in Forum

240.  According to Indian Road Congress, the width of carriageway, is
A. 3.75 m for single lane
B. 7.0 m for two lanes without raised kerbs
C. 7.5 m for two lanes with raised kerbs
D. All the above
Discuss in Forum

241.  A single lane carriage way whenever changes to two-lane carriage way, is affected through a taper of
A. 1 in 10
B. 1 in 15
C. 1 in 20
D. linl5to 1 in 20.
Discuss in Forum

242. Pick up the correct statement from the following :
A. Minimum desirable width of medians on rural highways is 5 metres
B. Minimum width of medians should be 3 metres
C. On long bridges and viaducts, the width of medians should be 1.5 m
D. All the above.
Discuss in Forum

243. The desirable camber for straight cement concrete roads, is
A. 1 in 33 to 1 in 25
B. 1 in 40 to 1 in 33
C. 1 in 150 to 1 in 140
D. 1 in 160 to 1 in 140
Discuss in Forum

244.  The desirable camber for straight roads with water bound macadam or gravel surface, is
A. 1 in 33 to 1 in 25
B. 1 in 40 to 1 in 33
C. 1 in 150 to 1 in 140
D. 1 in 160 to 1 in 140
Discuss in Forum

245. The desirable camber for straight roads with thin bituminous surfacing, is
A. 1 in 33 to 1 in 25
B. 1 in 40 to 1 in 33
C. 1 in 150 to 1 in 140
D. 1 in 160 to 1 in 140
Discuss in Forum

Page 35 of 41

« 33 34  35  3637 »